Epoflex® TW Laminate

Innovation meets knowledge! Your advantages with our technologies:


Providing a risk-free environment for both, mankind and our world is what all our products are made and developed for.

Easy To Use

The simple usage of technologies make a difference. Our products are customer friendly and provide easy access and fast application times.


Constant improvement makes the difference between a good or a smart choice. Optimization is perfect for you, but also for our environment.


Our nature in striving for the best brought us to the current state as trusted, high performance technology supplier for global companies.

The Epoflex® TW laminate tank lining system is an internal tank lining system to rehabilitate tanks directly on-site without interruption of site service ensuring business continuity.
The system is developed for underground and aboveground steel and concrete tanks, vessels, and containers with drinking water, saltwater and wastewater.
Very good chemical resistance.
The laminate layer is applied in order to reinforce the tank shell. Due to this the structural reinforcement of the tank, the tanks obtain on average more than 15 years of additional life.

Structure of the lining system:

Preliminary Works:

  • High-pressure water jet or sandblasting
  • Reprofiling with putty if it is necessary
  • Create fillets with putty if it necessary

Coating Application Technology:

  • No ground layer is required.
  • Manual application of lamination of the surface with ADAFLEX® and application of a woven double-layered fiberglass (450 g/m2)
  • Coverage of the glass fiber with ADAFLEX® of the laminate
  • Slightly rub or sandpaper of the entire surface, remove dust
  • Spraying the cover layer EPOFLEX® TW white
  • Consumption for 800 m approx. 1.0 kg/m2

Installation note:

The above information is based on tests by approved institutes (e.g. TÜV Süd Germany) and many years of experience. As the lining performance depends on correct installation, we offer application courses for certified installers and installation supervisors and provide certificates which shall be renewed every 3 years.

Tank Lining Systems: Frequently Asked Questions

Structural tank lining systems start from a thickness of 0,5mm up to 4mm. These thick film systems can maintain their function even if the substrate below looses their function e.g. steel below is fully corroded due to pit corrosion.
Yes, they can have different important properties such reach a crack bridging effect up to 300% of elongation and they can have a high loadability and resist to water, seal concrete/steel concjunctions etc.
There are structural linings which are glassfiber reinforced such as Adapox DSF or Epoflex Laminate and others which are not glass fiber reinforced such as Epoflex 590.
They can be applied in above ground tanks, underground tanks, concrete surfaces in contact with chemicals, water, food etc.
Depending on the system we propose grit blasting, water blasting or a surface preparationg with TCR Rust Convertter
A vacuum intersticial space is created and 24/7 monitored by a vacuum leak detection system. It consists of a primary and secondary containment.

Get Your Epoflex® TW Laminate Quotation!

Similar Products

Epoflex® TW Laminate