TCR® Rust Preventer

Innovation meets knowledge! Your advantages with our technologies:

Safe

Providing a risk-free environment for both, mankind and our world is what all our products are made and developed for.

Easy To Use

The simple usage of technologies make a difference. Our products are customer friendly and provide easy access and fast application times.

Optimized

Constant improvement makes the difference between a good or a smart choice. Optimization is perfect for you, but also for our environment.

Efficient

Our nature in striving for the best brought us to the current state as trusted, high performance technology supplier for global companies.

TCR® Rust preventer is a temporary tank preparation agent designed for use in a severe environment. It is a pre-coating liquid used on a sandblasted steel surface. The surface can be sandblasted or similar (water jet-blasted, shot-blasted, grid blasted, etc).

If an application of the coating system is not possible right after the steel subsurface treatment (blasting), the freshly maintained steel surface must be kept safe from rust until the coating system is technically applicated.
TCR® Rust preventer provides 14 days of permanent protection for steel surfaces and prevents any form of corrosion for the above mention time period.
It can be applied easily by hand with spraying tools. 1 litre of the product is sufficient to treat approx. 20 square meters and has a reaction time of only 3 hours.
It is compatible with Epoflex coating systems as well as mostly used paint types and coating systems, alkyd systems, modified alkyds, chlorinated rubber, epoxies, polyurethanes, types of vinyl and the new water-based paint systems.
The cured surface is re-coatable without doing any additional preparation or removal of the product.

Advantages:

  • Ready to use product, no preparation is necessary before utilization
  • Cost-effective surface treatment solution due to material transport, handling and equipment usage
  • Fast applicable (50 sqm hourly)
  • The safe working atmosphere for applicators because it is solvent-free and non-dangerous material
  • TCR® Rust preventer is an exceptional environment friendly steel preparation solution owing to the fact that it does not provide any residuals or waste

Cleaning & Surface Preparation: Frequently Asked Questions

Step 1: Degreasing with TCR® Cleaning Liquid
Step 2: TCR®6 tank washing
Step 3: TCR®7 sludge removing
Alternatively the process can be combined with the TCR®15.
A gasoline tank can easily reach a secure state by combining cleaning and degassing technologies.
The TCR® Rust Converter allows a surface preparation by binding agressive salts, thin rust and water in a polymer composite which then allows to apply a lining on the surface with suitable adhesion and a barrier against corrosion under the coating.
For a long term installation the TCR® Rust Converter can only be used for structural linings.
The TCR® Rust Converter is a surface preparation solution, the TCR® Rust preventer is a holding product to avoid flash rust on blasted surfaces.
The TCR® Atomizing Agent is sprayed with the TCR® Atomizing Pump which can be directly ordered as combo package. It does not require any additional water or compressed air.
The TCR® Atomizing Pump works with high pressure and very fine atomization. Therefore, it is perfectly suitable for a sanification.

Get Your TCR® Rust Preventer Quotation!

Similar Products

TCR® Rust Preventer