TCR® 6/7 – Tank Cleaning Without Opening The Manhole

Innovation meets knowledge! Your advantages with our technologies:

Safe

Providing a risk-free environment for both, mankind and our world is what all our products are made and developed for.

Easy To Use

The simple usage of technologies make a difference. Our products are customer friendly and provide easy access and fast application times.

Optimized

Constant improvement makes the difference between a good or a smart choice. Optimization is perfect for you, but also for our environment.

Efficient

Our nature in striving for the best brought us to the current state as trusted, high performance technology supplier for global companies.

The TCR® 6/7 system has been designed to clean underground storage tanks with No-Man-Entry and without opening the manhole at all. It can be used even for underground tanks without a manhole in case a 4-inch slot is available. Hence, it is particularly used to clean and degas tanks before opening the manhole.

The TCR® 6 is the device for prewashing and is connected to a high-pressure pump which provides the desired 160-230 bar pressure and min. 60 l/min flow. For the final cleaning and the removal of the sludge the TCR® 7 is used. It is connected to a high-pressure supply, the same as the TCR®6, as well as to a vacuum unit to suck the sludge while washing. For the operation, a cleaning truck providing pressure and suction can be used as well as a simple pumping and vacuum system. Both units are designed to spread along the entire length of the tanks in order to have a proper washing over the entire shell and suction from the lowest point of the tank independently if the tank is inclined or not.

The TCR® 6/7 has an ATEX certification to be operated in “zone 0” environments.
Cleaning and maintenance of the TCR® 6/7 are very easy thanks to its simple structure and there are no moving or rotating parts. No lubrication is required.

Advantages:

  • Degassing and cleaning technology trough a 4-inch slot
  • Extremely fast as no complicated opening of the manhole is necessary
  • Safe opening of the manhole after cleaning and degassing of the tank
  • Flexible to use as connectable to any cleaning truck
  • Easy tank cleaning device because of the compact size and the low weight
  • Removing every sludge and residuals from the tank shell
  • The whole process with ATEX “Zone 0” certified equipment
  • No-Man-Entry Technology

Simple Schematic Method of Statement:

TCR 6 - 7 Tank Cleaning - Simple Method Statement - Wolftank Adisa

TCR-6-and-7
Category Tags , ,

Downloads

Cleaning & Surface Preparation: Frequently Asked Questions

Step 1: Degreasing with TCR® Cleaning Liquid
Step 2: TCR®6 tank washing
Step 3: TCR®7 sludge removing
Alternatively the process can be combined with the TCR®15.
A gasoline tank can easily reach a secure state by combining cleaning and degassing technologies.
The TCR® Rust Converter allows a surface preparation by binding agressive salts, thin rust and water in a polymer composite which then allows to apply a lining on the surface with suitable adhesion and a barrier against corrosion under the coating.
For a long term installation the TCR® Rust Converter can only be used for structural linings.
The TCR® Rust Converter is a surface preparation solution, the TCR® Rust preventer is a holding product to avoid flash rust on blasted surfaces.
The TCR® Atomizing Agent is sprayed with the TCR® Atomizing Pump which can be directly ordered as combo package. It does not require any additional water or compressed air.
The TCR® Atomizing Pump works with high pressure and very fine atomization. Therefore, it is perfectly suitable for a sanification.

Get Your TCR® 6/7 - Tank Cleaning Without Opening The Manhole Quotation!

Similar Products

TCR® 6/7 - Tank Cleaning Without Opening The Manhole

We Are Here To Respond To Your Questions!

Don’t hesitate to send us your question. We are always pleased to solve all your questions. 

Ask Us